• Reference ID 391
  • Builder McConaghy Boats
  • Model MC31
  • Designer Dunning & Assoc
  • Year 2016
  • L.O.A. (mtr) 9.15
  • Beam (mtr) 3.05
  • Draft (mtr) 2.6
  • Engine Yanmar Marine diesel

Yacht description

She was recently antifouled, sail drive and engine serviced, some new stanchions. Owner has maintained her immaculately.

Designed and constructed in accordance with the requirements of ISO 12215 Category A as per ISAF Offshore Special Regulations, Section 3.03.1 a

Asking price 122.000 USD


North Sails

  • main
  • 2 x jibs
  • 2 x asymmetric spinnakers (both heavy and light)


  • 2 x setee seats with lifting lids in saloon area
  • 2 x setee seat cushions, colour to be selected from sunbrella range
  • Light weight "porta potti" head
  • Removable ice box cooler under companionway step
  • 2 x LED strip lights in saloon area hard wired to switch board
  • Suitable Galley facility: small sink bucket
  • 2 x Aluminium framed pipe cots aft of companionway
  • Stove - single gimballed


  • 12Volt DC Distribution Panel
  • Start battery
  • House battery
  • Alternator 80 amp
  • LED Navigation Lights

Deck and Cockpit

  • Harken Deck Gear Package
  • 2 x Primary Winches - Harken 40.2 PTP (Plain Top Performas)
  • 2 x Runner Winches - Harken 35.2 STP (Self Tailing Performas)
  • 4 x Harken winch handles
  • 4 x McConaghy carbon fibre winch handle pockets
  • Carbon fibre air foil stanchions, pushpits and pulpits
  • carbon life line roller tubes for top life line between pullpit and first stanchion aft pt & stb
  • Stainless Steel 1/19 wire lifelines
  • Fixed bow pole easily removable from socket in bow
  • 4 x Spinlock XTR rope clutches in pit (jib, frac, MH, tackline)
  • Running Rigging Supplied by Sydney Rigging Specialists & Southern Spars: 2 x Jib sheets, 2 x Spinnaker sheets (lead under deck to trimmer), 1 x Tack line lead to stb side of pit (1:1 and 2:1 options as standard), Optional Port tack line with spinlock XTR in pit (removable for O.D.)
  • 2 x Running backstay tails
  • Jib In/Out purchase lead to jib trimmer on both pt & stb side
  • Jib Up/Down purchase lead to jib trimmer on both pt & stb side
  • Jib Cunningham purchase lead to jib trimmer on stb side
  • Spinnaker Take down line lead to cockpit aft
  • Mainsheet coarse tune on swivel cleat in cockpit
  • Mainsheet fine tune purchase lead to main trimmer
  • Traveller purchase lead to main trimmer
  • Main Cunningham purchase lead aft to main trimmer
  • Main Outhaul purchase lead aft to main trimmer
  • Vang purchase lead aft behind traveller
  • Carbon fibre tiller with spinlock tiller extension
  • Carbon fiber helmsman and main trimmer foot bars
  • Carbon fiber guest foot bars aft of main traveller PT & STB
  • 4 x Inspection ports on cockpit sides for rope tails
  • McConaghy custom sliding forward hatch with pneumatic seal. Rounded edges of front hatch for smooth spinnaker hoists and drops. Hatch seal pump located in cockpit.
  • Cut out in front hatch to allow hatch to close with sheets attached to spinnaker
  • spare front hatch lid for offshore use if cut out option above is selected
  • 12v compresor for forward hatch seal
  • Padeyes for cockpit jackstays / clipping Points


  • Carbon fibre Mast with Two sets of swept back carbon spreaders. Split two piece mast with reuseable join for ease of road transport
  • Internal Hydraulic Mast Jack easily adjustable when sailing
  • Easily adjustable mast step for prebend tuning
  • Main halyard lock
  • Jib halyard lock
  • 1 x Mast head spinnaker halyard
  •  2nd Mast head spinnaker halyard with XTR rope clutch (removable for O.D.)
  • 1 x Fractional halyard
  • bullet lock for fractional halyard (removable for O.D)
  • genoa staysail halyard with XTR rope clutch (removable for O.D.)
  • Adjustable Forestay with lashing
  • Carbon Fibre Boom includes 2 reef lines with in built XTR rope clutches and outhaul purchase
  • Hinging mast base for easy stepping and lowering of mast. (Mast hinges aft through)


  • 15 hp Yanmar diesel engine with Sail Drive
  • 2 Blade Folding Propeller
  • Spinlock flush throttle control
  • Fuel filter and water seperator
  • Waterlock muffler
  • 42 Litre rigid plastic fuel tank

Electronics and Navigational Gear

  • Magnetic compass supplied and installed
  • VHF Radio
  • B&G H5000 with 2 x mast base displays


  • Manual bilge pump
  • 4 Auto electric bilge pumps (price for 4)
  • Additional manual bilge pump operable from below deck


  • Carbon fibre keel fin
  • Lead Bulb
  • Retractable for motoring in shallow water & transport
  • Removable crane for keel retracting
  • Carbon fibre rudder stock
  • Self aligning Jeffa bearings


The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.